LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Front Door Lock Cylinder >> Installation

Front Door Lock Cylinder: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the door lock cylinder.
    • Tighten the Torx screw to 6 Nm (4 lb.ft).
scientia non olet · About LEMON Manuals