LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Handles, Locks, Latches & Entry Systems) >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Door Lock Cylinder Cover >> Installation

Door Lock Cylinder Cover: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure that the door lock cylinder cover is pushed firmly in the sequence shown to install all 3 clips, and that the door lock cylinder cover is securely attached to the vehicle. Failure to follow this instruction may result in damage to the vehicle.
  1. See figure.
    GJ0023159
scientia non olet · About LEMON Manuals