LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Automatic Transmission/Transaxle External Controls (V8 5.0L Petrol/V8 S/C 5.0L Petrol)) >> Automatic Transmission/Transaxle External Controls (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Description And Operation >> External Controls >> Park Interlock And Neutral Lock >> Intermediate Position

Intermediate Position

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

If the JaguarDrive selector is rotated slowly from P to S and back to position P with the brake pedal pressed, the R or D position display letter in the message center will flash and the transmission will remain in park or neutral depending on the previous starting position of the selector.

If the brake pedal is released when R or D is flashing in the message center and the JaguarDrive selector is rotated to the R or D position, the required range will not be selected and the transmission will remain in park or neutral, depending on the previous starting position. This feature is known as soft lock.

If the driving range letter in the message center is flashing and the vehicle has no drive, the driver should depress the brake pedal to reselect N or P, and then select the required driving range while the brake pedal remains pressed.