LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Panel & Console) >> Instrument Panel And Console >> Removal And Installation >> Instrument Panel Lower Trim Panel >> Installation

Instrument Panel Lower Trim Panel: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rheostat switch assembly and align the instrument panel lower trim panel.
    • Secure the switch assembly clips.
    • Connect the switch assembly electrical connector.
  2. Install the instrument panel, lower trim panel.
    • Install and secure the diagnostic socket.
    • Align the clips.
    • Install the Torx screws.
    • Install the Torx bolts and tighten to 6 Nm (4 lb.ft).
  3. Install the MOST diagnostic port.
    • Secure the clip.
  4. Install the driver's side footwell trim panel.
    • Carefully align and secure the clips.
  5. Install the instrument panel driver's side reinforcement trim panel.
    • Align the pegs and secure with the clips.
  6. Install the instrument panel end trim panel.
    • Release the door aperture seal.
    • Carefully align and secure the clips.
    • Install the aperture seal.
scientia non olet · About LEMON Manuals