LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Panel & Console) >> Instrument Panel And Console >> Removal And Installation >> Glove Compartment >> Removal

Glove Compartment: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel end trim panel.
    • Release the 3 clips.
    GJ0009300
    2. CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
  2. Remove the passenger side footwell trim panel.
    • Remove the 3 clips.
    GJ0009301
  3. Release the glove compartment.
    • Remove the 5 Torx screws.
    • Release the 2 clips.
    GJ0009302
  4. Remove the glove compartment.
    • Disconnect the 2 electrical connectors.
    • Release the glove compartment lamp assembly.
    GJ0009303
scientia non olet · About LEMON Manuals