LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Instrument Panel & Console) >> Instrument Panel And Console >> Removal And Installation >> Glove Compartment >> Installation

Glove Compartment: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the glove compartment.
    • Install the lamp assembly.
    • Connect and secure the electrical connectors.
    • Tighten the Torx screws.
  2. Install the passenger side footwell trim panel.
    • Carefully secure the clips.
  3. Install the instrument panel end trim panel.
    • Release the door aperture seal.
    • Carefully secure the clips.
    • Install the aperture seal.
scientia non olet · About LEMON Manuals