LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wipers & Washers) >> Wipers And Washers >> Removal And Installation >> Headlamp Washer Pump >> Installation

Headlamp Washer Pump: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new seal.
  2. Install the windshield washer pump.
    • Connect and secure the electrical connector.
    • Connect the washer jet hose.
  3. Install the fender splash shield. Refer to Fender Splash Shield information.
  4. Refill the washer reservoir.
  5. Install the windshield washer pump.
    • Connect and secure the electrical connector.
    • Connect the washer jet hose.