LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wipers & Washers) >> Wipers And Washers >> Removal And Installation >> Headlamp Washer Jet >> Installation

Headlamp Washer Jet: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the headlamp washer jet.
    • Tighten the Torx screws.
    • Connect the washer jet hose.
  2. Install the headlamp assembly.
    • Connect and secure the electrical connector.
    • Position the locating pegs.
  3. Connect the washer jet hose.
  4. Secure the headlamp assembly.
    • Tighten the bolts.
  5. Close the hood.
  6. Connect the battery ground cable. Refer to SPECIFICATIONS information.
scientia non olet · About LEMON Manuals