LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Side Impact Sensor - Convertible Top >> Installation

Side Impact Sensor - Convertible Top: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side impact sensor.
    • Tighten the bolts to 10 Nm (7 lb.ft).
    • Connect the electrical connector.
  2. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel - Vehicles With: Convertible Top information.
scientia non olet · About LEMON Manuals