LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Front Impact Severity Sensor >> Removal

Front Impact Severity Sensor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The LH front impact severity sensor is illustrated, removal of the RH sensor is a similar procedure.
  1. Open the hood.
  2. Remove the fan cowl.
    • Remove the 15 clips.
      GJ0009370
  3. Remove the front impact severity sensor.
    • Remove the 2 bolts.
    • Disconnect the electrical connector.
      GJ0010263
scientia non olet · About LEMON Manuals