LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Front Impact Severity Sensor >> Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front impact severity sensor.
    • Connect the electrical connector.
    • Tighten the bolts to 8 Nm (6 lb.ft).
  2. Install the fan cowl.
    • Secure with the clips.
scientia non olet · About LEMON Manuals