LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Supplemental Restraint System) >> Supplemental Restraint System >> Removal And Installation >> Driver Air Bag Module >> Installation

Driver Air Bag Module: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the driver air bag module.
    • Connect the electrical connectors.
    • Carefully align and secure the clips.
  2. Connect the battery ground cable and install the cover. Refer to Specifications information.
  3. Connect WDS to the vehicle and configure a new module.
scientia non olet · About LEMON Manuals