LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front End Body Panels) >> Front End Body Panels >> Removal And Installation >> Fender Splash Shield >> Installation

Fender Splash Shield: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fender splash shield, front section.
    • Tighten the Torx bolts.
  2. Install the fender splash shield, rear section.
    • Tighten the Torx bolts.
    • Tighten the nuts.
    • Install the clip.
  3. Install the wheel and tire. Refer to Wheel and Tire information.
  4. Connect the battery ground cable.
scientia non olet · About LEMON Manuals