LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front End Body Panels) >> Front End Body Panels >> Removal And Installation >> Cowl Vent Screen >> Removal

Cowl Vent Screen: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always protect paintwork and glass when removing exterior components.
  1. Remove the air intake cover.
    • Remove the 3 clips.
      GJ0008901
  2. Remove the brake master cylinder cover.
    • Remove the 4 clips.
      GJ0008902
  3. Remove the windshield wiper arms. Refer to Wiper Pivot Arm information.
  4. Remove the plenum chamber panel.
    • Release the retaining clip.
    • Release the 3 clips.
    • Disconnect the washer jet hose.
      GJ0008903
scientia non olet · About LEMON Manuals