LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front End Body Panels) >> Front End Body Panels >> Removal And Installation >> Cowl Vent Screen >> Installation

Cowl Vent Screen: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the plenum chamber panel.
    • Connect the washer jet hose.
    • Carefully secure the clips.
  2. Install the air intake cover.
    • Carefully secure the clips.
  3. Install the brake master cylinder cover.
    • Carefully secure the clips.
  4. Install the windshield wiper arms. Refer to Wiper Pivot Arm information.
scientia non olet · About LEMON Manuals