Coolant Expansion Tank: Removal
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Since injury such as scalding could be caused by escaping steam or coolant, do not remove the filler cap from the coolant expansion tank while the system is hot.
CAUTION:
Anti-freeze concentration must be maintained at 50%.
CAUTION:
Correct installation of the Coolant expansion tank cap can be obtained by tightening the cap until an audible click is heard.
- Refer to Cowl Vent Screen information.
- Torque: 23 Nm
- See figure
- Torque: 9 Nm
- See figure
- See figure
- See figure
WARNING:
Release the cooling system pressure by slowly turning the coolant expansion tank cap a quarter of a turn. Cover the expansion tank cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction may result in personal injury.
CAUTION:
Be prepared to collect escaping fluids.