LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System - General Information) >> Engine System - General Information >> General Procedures >> Piston Ring-To-Groove Clearance

Piston Ring-To-Groove Clearance

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The piston ring must protrude from the piston groove. To determine the piston ring clearance, insert the Feeler Gauge right to the back of the groove, behind the wear ridge.
  1. Using the Feeler Gauge, measure the piston ring clearance.
    GJ0002937
scientia non olet · About LEMON Manuals