LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System - General Information) >> Engine System - General Information >> General Procedures >> Piston Ring End Gap

Piston Ring End Gap

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not mix up the piston rings. Install the piston rings in the same position and location.
  1. Using the Feeler Gauge, measure the piston ring gap.
    • The values given in the specification refer to a gauge ring used during production.
      GJ0002936
scientia non olet · About LEMON Manuals