LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System - General Information) >> Engine System - General Information >> General Procedures >> Piston Pin To Bore Diameter

Piston Pin To Bore Diameter

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The piston and piston pin form a matched pair. Do not mix up the components.
  1. Measure the diameter of the piston pin bore.
    • Measure the diameter in two directions.
    • If the values are not to specification, install both a new piston and a new piston pin.
      GJ0002935
scientia non olet · About LEMON Manuals