LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine System - General Information) >> Engine System - General Information >> General Procedures >> Camshaft Bearing Journal Diameter

Camshaft Bearing Journal Diameter

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Determine the diameter of the camshaft journals.
    • Using a micrometer measure the diameter at 90 degrees intervals to determine if the journals are out-of-round.
    • Measure at two different points on the journal to determine if there is any tapering.
    • If the measurements are out of the specified range, install a new camshaft.
      GJ0002923