Tie Bar: Removal
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the LH rear wheel and tire. Refer to WHEEL AND TIRE information.
- Remove the tie rod.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
NOTE:
Use an additional wrench to prevent the ball joint rotating.