LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Safety Belt System) >> Safety Belt System >> Removal And Installation >> Rear Safety Belt Buckle >> Removal

Rear Safety Belt Buckle: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion information.
  2. Remove the rear safety belt stalk trim panel.
    • Release from the clip.
      GJ0009406
  3. Remove the rear safety belt stalk.
    • Remove the Torx bolt.
      GJ0009407
scientia non olet · About LEMON Manuals