Rear Safety Belt Buckle: Installation
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Install the safety belt stalk.
- Tighten the Torx bolt to 45 Nm (33 lb.ft).
- Install the rear safety belt stalk trim panel.
- Secure with the clip.
- Install the rear seat cushion. Refer to Rear Seat Cushion information.