LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Safety Belt System) >> Safety Belt System >> Removal And Installation >> Front Safety Belt Buckle >> Installation

Front Safety Belt Buckle: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat safety belt pretensioner.
    • Connect and secure the electrical connector.
    • Tighten the new Torx bolt to 45 Nm (33 lb.ft).
  2. Secure the front seat backrest cover lower tension straps.
  3. Install the front seat. Refer to FRONT SEAT information.
  4. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals