LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Safety Belt System) >> Safety Belt System >> Diagnostic Procedures >> Safety Belt System >> Diagnostic Guide Inertia Reel Safety Belts >> Pinpoint Test B: Webbing-Trapped In Seat

Pinpoint Test B: Webbing-Trapped In Seat

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1: WEBBING-TRAPPED IN SEAT 
    1. Visually inspect the condition of the suspect safety belt
    2. Lift the seat base or release the seat backrest as required
    3. Free the trapped webbing, allow the webbing to retract Note: If the automatic locking retractor is activated, allow the webbing to retract until the clicking stops 
    4. Check for correct operation twice 
    5. Does the webbing move freely then retract correctly? 

      YES:  No further action required

      NO:  Refer to Pinpoint Test C .