LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Rear Drive Axle/Differential) >> Rear Drive Axle/Differential >> Removal And Installation >> Differential Locking Motor >> Installation

Differential Locking Motor: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure that the mating faces are clean and free of foreign material.
    • Torque: 11 Nm
    • Apply a suitable amount of approved sealant to one of the mating faces.
      GJ0025733
  1. See figure
    GJ0025732
  2. Torque: 7 Nm
    GJ0025378
  3. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  4. See figure
    GJ0025336
  5. CAUTION: Take extra care when handling the component.
  6. See figure
    GJ0025331
    • Torque: 25 Nm
      GJ0025731
  7. Torque: 25 Nm
    GJ0025333
  8. Refer to Differential Draining And Filling . .