LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Anti-Lock Control - Stability Assist) >> Anti-Lock Control - Stability Assist >> Removal And Installation >> Yaw Rate Sensor And Accelerometer >> Removal

Yaw Rate Sensor And Accelerometer: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Battery Disconnect and Connect information.
  2. Refer to Floor Console information.
  3. CAUTION: Make sure that all diagnostic trouble codes (DTCs) have been removed after the road test.
    NOTE: Make sure that this component is installed to the noted removal position.
  4. Torque: 6 Nm
    GJ0025595