Automatic Transmission/Transaxle (V8 5.0L Petrol/V8 S/C 5.0L Petrol): Removal: Transmission
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
Special Tool(s)
| 303-1436 Engine Lifting Bracket Front |
- Refer to Battery Disconnect And Connect information.
- Raise and support the vehicle.
- Refer to Transmission Fluid Cooler Tubes information.
- Refer to Catalytic Converter information.
- See figure
- Special Tool(s): Engine Lifting Bracket Front (303-1436)
- Using the special tool, support the engine.
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
- See figure
-
- Make sure that the alignment mark is visible through the inspection hole on removal of the last torque converter bolt.
- See figure
- Using a suitable stand, support the transmission.
- See figure
- See figure
-
- Install the torque converter retainer.
WARNING:
Make sure to support the vehicle with axle stands.
WARNING:
Make sure that the transmission is secured with suitable retaining straps.
CAUTION:
Make sure that the torque converter remains in the transmission.
NOTE:
This step requires the aid of another technician.