LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Automatic Transmission/Transaxle (V8 5.0L Petrol/V8 S/C 5.0L Petrol)) >> Automatic Transmission/Transaxle (V8 5.0L Petrol/V8 S/C 5.0L Petrol) >> Diagnostic Procedures >> Diagnostic Flow Chart >> Inspection And Verification

Inspection And Verification

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of damage and system integrity.

    Visual Inspection 

    Mechanical Electrical Hydraulic
    • Damaged/stuck shift mechanism
    • Damaged automatic transmission casing
    • Blown fuse(s)
    • Damaged, loose or corroded connectors
    • Wiring harness
    • Fluid level too high/low
    • Poor condition of fluid
    • Fluid leak
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident check for diagnostic trouble codes (DTCs) and refer to the DTC Index.