Variable Valve Timing (VVT) Oil Control Solenoid RH: Installation
WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
- If required, carry out a short drive cycle. Refer to Powertrain Control Module Short Drive Cycle Self-Test information.
CAUTION:
Make sure that the mating faces are clean and free of foreign material.
NOTE:
Lubricate the O-ring seal with clean engine oil.
NOTE:
For NAS vehicles only.