LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Electronic Engine Controls (V8 5.0L Petrol)) >> Electronic Engine Controls (V8 5.0L Petrol) >> Removal And Installation >> Heated Oxygen Sensor (Ho2S) LH >> Removal

Heated Oxygen Sensor (Ho2S) LH: Removal

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Battery Disconnect and Connect information.
    2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  2. Raise and support the vehicle.
  3. Refer to Air Deflector information.
  4. Refer to Catalytic Converter information.
  5. See figure
    GJ0025644
  6. See figure
    GJ0025645
  7. See figure
    GJ0025642
    8. CAUTION: Make sure that the mating faces are clean and free of foreign material.
  8. Wrench, H02S (310-121)

    Torque: 48

    GJ0012562
scientia non olet · About LEMON Manuals