LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Electronic Engine Controls (V8 5.0L Petrol)) >> Electronic Engine Controls (V8 5.0L Petrol) >> Removal And Installation >> Fuel Rail Pressure (FRP) Sensor >> Removal

Fuel Rail Pressure (FRP) Sensor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions information.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to Fuel System Pressure Release - 5.0L information.
  2. Refer to Engine Cover - 5.0L information.
  3. See figure
    GJ0013229
    4. WARNING: Be prepared to collect escaping fluids.
    CAUTION: Make sure that all openings are sealed. Use new blanking caps.
  4. Torque: 32 Nm
    GJ0012559
scientia non olet · About LEMON Manuals