LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Electronic Engine Controls (V8 5.0L Petrol)) >> Electronic Engine Controls (V8 5.0L Petrol) >> Removal And Installation >> Camshaft Position (CMP) Sensor RH >> Removal

Camshaft Position (CMP) Sensor RH: Removal

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.

    All vehicles 

    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.
  2. Vehicles with supercharger 

  3. Refer to Thermostat Housing - Vehicles With: Supercharger information.
  4. Vehicles without supercharger 

  5. Refer to Thermostat Housing - Vehicles Without: Supercharger information.
  6. All vehicles 

    • Torque: 10 Nm
      GJ0013049