LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Electronic Engine Controls (V8 5.0L Petrol)) >> Electronic Engine Controls (V8 5.0L Petrol) >> Removal And Installation >> Camshaft Position (CMP) Sensor RH >> Installation

Camshaft Position (CMP) Sensor RH: Installation

WARNING: This page is about a different car, the 2011 Jaguar XK and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure that the mating faces are clean and free of foreign material.
    CAUTION: Make sure that the sensor tip is clean and free of foreign material.
    NOTE: Lubricate the O-ring seal with clean engine oil.
  1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals