Rear Seat Backrest: Installation
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear seat backrest.
- Secure in the retainers.
- Tighten the Torx bolt to 10 Nm (7 lb.ft).
- Install the auxiliary junction box access cover.
- Align the pegs and secure the clip.
- Install the LH rear seat cushion. See Rear Seat Cushion .
- Secure with the clips.
- Install the RH rear seat cushion.