LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Lumbar Motor >> Removal

Front Seat Lumbar Motor: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make the SRS system safe. Refer to SUPPLEMENTAL RESTRAINT SYSTEM information.
  2. Remove the front seat. See Front Seat . .
  3. Release the front seat backrest cover lower tension straps.
    • Release from the seat frame.
      GJ0009205
  4. Release the 9 front seat backrest cover rear panel retaining clips.
    • Release from the backrest cover.
    • Release from the seat frame.
      GJ0009206
  5. Release the front seat lumbar assembly.
    • Release the 3 electrical connectors.
    • Remove the clip.
    • Disconnect the electrical connector.
      GJ0009215
  6. Remove the front seat lumbar assembly.
scientia non olet · About LEMON Manuals