LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Cushion Cover >> Removal

Front Seat Cushion Cover: Removal

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover and disconnect the battery ground cable.
  2. Make the SRS system safe. Refer to SUPPLEMENTAL RESTRAINT SYSTEM information.
  3. Remove the front seat. See Front Seat . .
  4. Release the front seat cushion outer trim panel.
    • Remove the 2 Torx screws.
  5. Remove the front seat cushion outer trim panel.
    • Release the 2 clips.
    • Disconnect the electrical connector.
      GJ0009211
  6. Remove the front seat hinge covers.
    • Remove the 2 Torx screws.
    • Remove the hinge cover retainers.
      GJ0009212
  7. Release the front seat backrest cover lower tension straps.
    GJ0009205
  8. Remove the front seat cushion assembly.
    • Release and disconnect the 2 electrical connectors.
    • Release the Velcro strap.
    • Release the 5 clips.
      GJ0009213
  9. Remove the front seat cushion cover.
    • Remove the 27 hog rings.
      GJ0009214
  10. Using WDS, calibrate a new front seat cushion cover.
scientia non olet · About LEMON Manuals