LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Seating) >> Seating >> Removal And Installation >> Front Seat Cushion Cover >> Installation

Front Seat Cushion Cover: Installation

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat cushion cover.
  2. Secure the front seat cushion assembly.
    • Connect and secure the electrical connectors.
    • Secure the Velcro strap.
    • Attach the clips.
  3. Secure the front seat backrest cover lower tension straps.
  4. Install the front seat cushion outer trim panel.
    • Connect the electrical connector.
    • Secure in the clips.
  5. Secure the front seat cushion outer trim panel.
    • Tighten the Torx screws.
  6. Install the front seat hinge covers.
    • Attach the hinge cover retainers.
    • Tighten the Torx screws.
  7. Install the front seat. See Front Seat . .
  8. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals