Pinpoint Test E: Front Seat Height, Tilt And/Or Extension Movement Noisy
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
- E1: COMPARE THE HEIGHT, TILT OR EXTENSION MOVEMENT NOISE WITH THE OTHER FRONT SEAT WARNING: Before work is carried out, make the air bag supplemental restraint system safe. For additional information, refer to Standard Workshop Practices section of service information.
- E2: COMPARE FRONT SEAT HEIGHT, TILT OR EXTENSION MOVEMENT NOISE TO FRONT SEAT IN OTHER VEHICLE
- Compare the front seat height, tilt or extension movement noise to front seat in other vehicle.
Is the front seat height, tilt or extension movement noise excessive when compared to front seat in other vehicle?
YES: Go to E 3.
NO: The front seat frame is operating correctly. Submit Electronic Product Quality Report (EPQR) with any further query.
- E3: CHECK FOR DEBRIS OBSTRUCTING SEAT MOVEMENT
- Check for debris obstructing seat movement.
Is the front seat height, tilt or extension movement obstructed by debris?
YES: Remove obstruction and re-check for noisy height, tilt or extension seat movement.
NO: Go to E 4.
- E4: CHECK FOR HEIGHT, TILT OR EXTENSION MOVEMENT MECHANISM LUBRICATION
- Check and apply manufacturer approved lubrication to seat height, tilt or extension movement mechanism and re-test for noise.
Is the front seat height, tilt or extension noise still apparent?
YES: Replace the relevant motor. Refer to relevant section of service information.
NO: The front seat height, tilt or extension motor is operating correctly.