Memory Store

WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.

Driver's Seat

Once the driver's seat, steering column and exterior mirrors have been adjusted, the vehicle is able to memorize these settings for future use by using the following procedure:

Push the memory button M, the red Light Emitting Diode (LED) will illuminate for five seconds
Whilst the LED is illuminated, press button 1, 2 or 3 to memorize the current settings

The LED will extinguish, and a chime will sound to confirm that the settings have been memorized. If the ignition is in the 'ON' mode, the message center will display a confirmation message.

Passenger Seat

The procedure to memorize a passenger seat position is the same as that for the driver's seat with two exceptions. There will be no chime or message to confirm the settings.