LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 N/A 5.0L Petrol -- XK/X150 >> Engine - V8 N/A 5.0L Petrol >> Right Exhaust Manifold >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. G11069547

    Torque Specification: 45 Nm 

    2. NOTE: Install a new gasket.
  2. G11285061

    Install the special tool.

    3. NOTE: If a new cylinder head is installed use the special tools in the illustration.
    NOTE: Install the special tool.
  3. G11285062
    4. CAUTION: Make sure that new bolts are installed.
    NOTE: Install the spacers in the noted position.
  4. G11285063

    Torque Specification: 10 Nm 

  5. G11285064

    Remove the special tool.

    6. CAUTION: Make sure that new bolts are installed.
    NOTE: Install the spacers in the noted position.
  6. G11540699

    Torque Specification: 10 Nm 

  7. Torque Specification: 18 Nm 
    Fig 1: Exhaust Manifold Bolt Tightening Sequence
    G11285066Courtesy of OF JAGUAR
  8. G11508024
  9. G11299589

    Torque Specification: 12 Nm 

  10. G11293775

    Torque Specification: 48 Nm 

    11. CAUTION: Discard the bolt.
  11. G11512231

    Torque Specification: 35 Nm 

  12. G11512234

    Torque Specification: 100 Nm 

  14. Refer to: Catalytic Converter RH
  15. Refer to: Battery Disconnect and Connect
scientia non olet · About LEMON Manuals