LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 N/A 5.0L Petrol -- XK/X150 >> Engine - V8 N/A 5.0L Petrol >> Oil Pump >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. G11285222

    Lubricate and install the new O-ring seals.

  2. G11285224

    Torque Specification: 

    M8 25 Nm 

    M6 12 Nm 

  3. G11285225

    Lubricate and install a new O-ring seal.

  4. G11285226

    Torque Specification: 12 Nm 

  5. G11285219

    Torque Specification: 21 Nm 

    6. NOTE: Tsubaki timing drive only.
  6. G11285228

    Install the lower timing chain making sure the colored chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

    7. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: Tsubaki timing drive only.
  7. G11285217

    Torque Specification: 21 Nm 

    8. NOTE: INA timing drive only.
  8. G11285230

    Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

    9. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: INA timing drive only.
  9. G11285218

    Torque Specification: 21 Nm 

  10. Refer to: oil Pan Extension 
  11. Refer to: Battery Disconnect and Connect
scientia non olet · About LEMON Manuals