LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 N/A 5.0L Petrol -- XK/X150 >> Engine - V8 N/A 5.0L Petrol >> Oil Cooler >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect
    2. WARNING: Make sure to support the vehicle with axle stands.

  2. Raise and support the vehicle.

  3. Refer to: Intake Manifold 

  4. Refer to: Cooling System Partial Draining And Vacuum Filling
  5. G11285125
  6. G11285126
    7. CAUTION:
    • Be prepared to collect escaping oil.
    • Be prepared to collect escaping coolant.
  7. G11285127

    Torque Specification: 13 Nm 

    8. CAUTION: Make sure that these components are installed to the noted removal position.
    NOTE: Install a new gasket.
  8. G11285128
    9. CAUTION:
    • Make sure that these components are installed to the noted removal position.
    • Install new o-ring seals
  9. G11285129
scientia non olet · About LEMON Manuals