LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 N/A 5.0L Petrol -- XK/X150 >> Engine - V8 N/A 5.0L Petrol >> Oil Cooler >> Removal And Installation >> Installation

Removal And Installation: Installation

    CAUTION:
    • Install all the bolts finger tight before final tightening.
    • Make sure that the area around the component is clean and free of foreign material.
    • Install the new seals.
    NOTE: Tighten the bolts in the indicated sequence.
    Fig 1: Oil Cooler Bolt Tightening Sequence
    GJ0012838Courtesy of OF JAGUAR

  1. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals