LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - V8 N/A 5.0L Petrol -- XK/X150 >> Engine - V8 N/A 5.0L Petrol >> Cylinder Head >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect
    2. WARNING: Make sure to support the vehicle with axle stands.

  2. Raise and support the vehicle.

  3. Refer to: left Camshaft Removal And Installation 
  4. Refer to: exhaust Manifold Removal And Installation 
  5. Refer to: intake Manifold 
  6. G11284951
  7. G11284952
  8. CAUTION: Discard the seal.
    NOTE: Engine shown removed for clarity.
    G11284953
  9. G11284954
  10. G11284955
  11. NOTE: Clamp the hose to minimize coolant loss.
    G11284956
  12. NOTE: Clamp the hose to minimize coolant loss.
    G11284957
  13. G11284958
  14. G11285762
  15. G11284959
  16. CAUTION: Discard the seals.
    G11284960
  17. G11284961
  18. G11284962
    19. CAUTION:
    • If a new cylinder head has been installed then new tappets must be installed.
    • If the cylinder head is being removed without a new component being installed, the tappets must be installed in their original positions.
    NOTE: Left-hand shown, right-hand similar.
  19. G11284963
    20. CAUTION: Discard the bolts.
  20. G11284964
    21. NOTE: Discard the gasket.
  21. G11284965
scientia non olet · About LEMON Manuals