Removal And Installation: Removal
WARNING:
Observe due care when working near a hot exhaust system.
NOTE:
Removal steps in this procedure may contain installation details.
-
Raise and support the vehicle.
- LH illustration shown, RH is similar.
- The step must be carried out on both sides.
Torque Specification: 25 Nm
Torque Specification: 25 Nm
Torque Specification: 50 Nm
- LH illustration shown, RH is similar.
- The step must be carried out on both sides.
WARNING:
Make sure to support the vehicle with axle stands.
NOTE:
CAUTION:
Make sure that the exhaust system is supported with suitable retaining straps.
NOTE: