LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Cooling Fan Motor And Shroud - V8 S/C 5.0L Petrol >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect (General Procedures).
  2. Refer to: Hood (Removal and Installation).
  3. WARNING: Do not work on or under a vehicle supported only by a jack.

    Always support the vehicle on safety stands.

    Raise and support the vehicle.

  4. Refer to: Radiator Splash Shield (Removal and Installation).
  5. Refer to: RIGHT AIR CLEANER OUTLET INTERMEDIATE PIPE (Removal and Installation).
  6. Refer to: LEFT AIR CLEANER OUTLET INTERMEDIATE PIPE (Removal and Installation).
  7. G11541352

    Torque Specification: 9 Nm 

  8. G11541353
  9. G11541354
  10. G11541355
  11. G11541356

    Torque Specification: 25 Nm 

  12. G11541357

    Torque Specification: 30 Nm 

  13. CAUTION: Make sure to protect the paintwork.
    G11541358

    Torque Specification: 23 Nm 

  14. G11541359
  15. G11541360

    Torque Specification: 7 Nm 

  16. G11541361
scientia non olet · About LEMON Manuals