LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2014 >> XK Base, 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers -- XK/X150 >> Bumpers >> Rear Bumper >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the 2 crush tubes.
    • Tighten the nuts to 25 Nm (18 lb.ft).
  2. With assistance, install the bumper.
    • Tighten the M8 bolts to 25 Nm (18 lb.ft).
  3. Install the rear bumper cover.

    For additional information, refer to: Rear Bumper Cover 

scientia non olet · About LEMON Manuals