Principles Of Operation: Resetting
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
If the electrical supply is disconnected from the parking brake control module, the actuator will loose its position memory. On battery re-connection and ignition on, 'APPLY FOOT AND PARK BRAKE' will be displayed in the instrument cluster message center indicating the parking brake requires resetting. To reset the parking brake, press and hold the foot brake. While holding the foot brake in position, move the parking brake switch to the 'Apply' position.