Lower Control Arm
WARNING: This page is about a different car, the 2011 Jaguar XKR, 2011 Jaguar XK, 2010 Jaguar XKR, and 2010 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
| Item Number | Description |
|---|---|
| 1 | Hydrabush |
| 2 | Lower control arm |
| 3 | Spherical bearing |
The cast lower control arm is fitted with a hydrabush in its inner end which locates between brackets on the subframe. The arm is secured with an eccentric bolt, an eccentric washer and a locknut which allow for adjustment of the castor and camber geometry.
The outer end of the control arm is fitted with a spherical bearing and locates between the cast brackets on the lower lateral control arm. The lower lateral control arm and lower control arm together form a wishbone design.